Holes in the base of the dash on a 66--reasons?
3 Attachment(s)
I know about the 2 smaller holes under the deluxe heater control being for the mounting of the control unit, but the 3 larger holes...the one on the driver side under the washer knob, the one next to the 2 small holes for the deluxe heater controls, and the 3rd over on the base of the glove box.
Also, the one under the radio area I wasnt sure about and couldnt find them in the assembly manual. Anyone know what they are for? Particularly the one under the radio, I was going to rig up a base bracket to support the radio since the ac vent box and speaker I have has crowded the top access a good bit to have the bracket come down from the top instead. |
Re: Holes in the base of the dash on a 66--reasons?
There are holes in cars and truck that were used to hold and align parts during assembly. That what I think these are.
Jimmy |
All times are GMT -4. The time now is 01:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com