1967 K20 Rear Spring Hanger Help
2 Attachment(s)
Hi everyone!
Well, I have hit a bit of a snag in my restoration project. It looks like the rear spring hangers on the back of the frame at some point were tweaked pretty good. They were removed and had a plate welded on the back of them and then bolted back on. My original plan was to clean them up and use new grade 8 hardware to reattach them, but I found that on the driver side of the frame the hanger is bent a bit and actually dips outward towards the driver's side of the truck. This twists the spring a bit. I was hoping to replace both hangers but I am not sure where to look for replacement parts. Does anyone know where I can find replacements? Here are some pictures showing what I am talking about. |
Re: 1967 K20 Rear Spring Hanger Help
You might want to try a company in Penna. called ESPO Springsnthings. They had the rear leaf spring bracket for my 66 K-10. Real nice people. Good luck.
|
Re: 1967 K20 Rear Spring Hanger Help
Quote:
Clay |
All times are GMT -4. The time now is 06:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com