The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   window regulator replacement (https://67-72chevytrucks.com/vboard/showthread.php?t=842806)

tdangle 03-08-2023 07:35 PM
window regulator replacement
 
Has anyone replaced a regulator without having to remove the vent window assembly and side window glass? Seems like it might be possible???

LockDoc 03-09-2023 12:53 AM
Re: window regulator replacement
 
Quote:
Originally Posted by tdangle (Post 9184992)
Has anyone replaced a regulator without having to remove the vent window assembly and side window glass? Seems like it might be possible???
If you remove the screws from the rear metal glass channel (one at the top and two at the bottom) and move it out of the way you could probably do it. You would have to figure out a way to hold the glass up after you removed it from the lower rollers, so you could get the regulator out.

LockDoc

ESC 03-09-2023 12:53 AM
Re: window regulator replacement
 
Heres one of a few videos on YouTube
https://youtu.be/RL7Q6sYeEMg

tdangle 03-09-2023 03:28 PM
Re: window regulator replacement
 
Quote:
Originally Posted by LockDoc (Post 9185129)
If you remove the screws from the rear metal glass channel (one at the top and two at the bottom) and move it out of the way you could probably do it. You would have to figure out a way to hold the glass up after you removed it from the lower rollers, so you could get the regulator out.

LockDoc
That is what I was thinking. Holding the glass up should work with duct tape over the top of the frame.


All times are GMT -4. The time now is 03:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com