small starter
 

i put one of the small starters on my 71 c/10 a couple years ago and need to put a new stater on a 65 327 motor now. bolts are straight across not off-set. can one of you refresh my memory as to which one i need to order? thanks!

Re: small starter
 

I use this one on my 67 327 and now have it on my BPE 355. Its a gear reduction starter

https://www.rockauto.com/en/moreinfo...=3882534&jsn=1

Re: small starter
 

thanks, i'll check it out.

Re: small starter
 

i can't find that part listed by part number or by description. could you tell me what model, year, and a price for it? maybe discontinued item? thanks

Re: small starter
 

I, and several others on a 1st gen Camaro forum, got that starter on Rockauto for around $70. It is a permanent magnet gear reduction starter. I bought mine a few years ago, maybe they don't carry them anymore. Its a new starter, not reman.

Here is the Remp part # listing and cross refrence chart from the 10MT to PG starter with or without the R terminal for 153 or 168 tooth FW

https://autoprollc.com/wp-content/up...eb2016_web.pdf

Re: small starter
 

thanks

Re: small starter
 

The bolt pattern on a stock GM starter changes based on the flywheel/flexplate diameter. 153 teeth or 12.75" uses the straight pattern and 168 teeth or 14" uses the diagonal pattern. If you have a straight pattern, it's most likely a car engine. I've never seen a truck with the small flexplate. When looking for a replacement, most aftermarket gear reductions will reference the tooth count/size or some will have dual patterns that will work with either.