The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Cethern · 11-22-2004, 09:19 PM

When I put a 1" body lift and new mounts I did one side at a time. I did loosen the side I was not doing. I got a good size floor jack and a 4x4 with a 2x4 on top to spread out the weight.
It took me longger than three hrs... But then I was trying to break loose OEM bolts..It went ok till the back bolts they are welded in with some good tack welds.

But your just taking a lift off it should go ok.....
Oh one last thing get a can of PB Blaster. and soak everything real good

11-22-2004, 09:19 PM	#8
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 637	When I put a 1" body lift and new mounts I did one side at a time. I did loosen the side I was not doing. I got a good size floor jack and a 4x4 with a 2x4 on top to spread out the weight. It took me longger than three hrs... But then I was trying to break loose OEM bolts..It went ok till the back bolts they are welded in with some good tack welds. But your just taking a lift off it should go ok..... Oh one last thing get a can of PB Blaster. and soak everything real good __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... Last edited by Cethern; 11-22-2004 at 09:24 PM.