The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bigcarguy · 07-04-2002, 10:34 PM

Well I adjusted the timing and a few other things and the truck cranked right up and drove fine. I'm guessing that 10g wire from the unfused terminal was put on there in anticipation of getting an HEI, but the previous owner just never got around to finishing the job. Would the truck run if the wire was the resistor type cause the truck ran great after I messed with the timing.

07-04-2002, 10:34 PM	#4
bigcarguy Finally a Bulldawg Join Date: Apr 2001 Location: Athens, Georgia Posts: 220	Well I adjusted the timing and a few other things and the truck cranked right up and drove fine. I'm guessing that 10g wire from the unfused terminal was put on there in anticipation of getting an HEI, but the previous owner just never got around to finishing the job. Would the truck run if the wire was the resistor type cause the truck ran great after I messed with the timing. __________________ Ah yes, the college life. School all morning, work all night, study when ya can. Uh...