The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - TH-400 conversion

Jesse 67 c-10 · 03-21-2002, 11:56 AM

Never heard of using oil to balance a drive shaft, does it work pretty good? would 10w-30 work? I have to shorten my driveshaft 4" from my 5 speed swap so I may try this. Cool idea!
Jesse

------------------
Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse

03-21-2002, 11:56 AM	#11
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	Never heard of using oil to balance a drive shaft, does it work pretty good? would 10w-30 work? I have to shorten my driveshaft 4" from my 5 speed swap so I may try this. Cool idea! Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.