The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Low hump for my high hump cab, comparison pics too

**Yukon Jack** · 02-23-2005, 11:11 AM

Thanks to new member shaneâ€™s67 I now have a low hump for my high hump cab. Do to the body lift necessitated by the big block swap I need to make some changes to allow the transfer case shifter too work. I tried lengthening the shifter but was not happy with that result. Shane cut this low hump out of a junker cab and sent it to me - thanks Shane!

Here are pics showing the high hump next to the low hump and pics showing the low hump about ready to be bolted down - it worked perfectly for me.

02-23-2005, 11:11 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Low hump for my high hump cab, comparison pics too Thanks to new member shaneâ€™s67 I now have a low hump for my high hump cab. Do to the body lift necessitated by the big block swap I need to make some changes to allow the transfer case shifter too work. I tried lengthening the shifter but was not happy with that result. Shane cut this low hump out of a junker cab and sent it to me - thanks Shane! Here are pics showing the high hump next to the low hump and pics showing the low hump about ready to be bolted down - it worked perfectly for me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 11:18 AM.