The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 03-08-2005, 08:51 PM

If you're using Windows XP, find the actual file on your computer, right-click the file and choose "Edit".

This should open it in MS Paint program.

From the 'Image" menu, choose Stretch/Skew. Change the numbers to be 50%horizontal and 50% vertical and click OK.

This will shrink the dimensions by half. From the 'File' menu, choose "Save as" and save the file as a JPEG with a different name.

The board should let you upload it without a problem.

If it's too small to see the details, you can try doing a 75% shrink.

03-08-2005, 08:51 PM	#12
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	If you're using Windows XP, find the actual file on your computer, right-click the file and choose "Edit". This should open it in MS Paint program. From the 'Image" menu, choose Stretch/Skew. Change the numbers to be 50%horizontal and 50% vertical and click OK. This will shrink the dimensions by half. From the 'File' menu, choose "Save as" and save the file as a JPEG with a different name. The board should let you upload it without a problem. If it's too small to see the details, you can try doing a 75% shrink. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.