View Single Post
Old 07-03-2005, 12:05 AM   #9
jtminton
II Timothy 4:2
 
jtminton's Avatar
 
Join Date: Mar 2005
Location: Fort Worth
Posts: 361
Quote:
Originally Posted by 3 on the tree
Do you have the 12v going to the correct terminal on the cap, and did you put the coil ends in the correct slots. I have seen people hook up their hot wires to the tach slot-don't work there.
Well, looking at the coil, from the plug side I have a yellow wire off the left side of the coil that goes on the left side plug slot, a black wire coming from the center of the coil that has a loop wire terminal that is hooked to the coil bolt, and a red wire from the right side of the coil that is going into the right plug slot. I have my 12v wire plugged into the right terminal, and the tach wire plugged into the left side.
__________________
72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus"

MY TRUE PRIDE AND JOY

"Dangit, Bobby, people will see that oil stain and think I'm a drunk."
jtminton is offline   Reply With Quote