[arkracing]

new cars usually have chinsey "tow hooks" under the bumper that shouldn't be trusted. best place to hook them is around a lower ctrl arm in the front and around the rear axel in the back if you can.

best suggestion would be to get a good size strap - and loop it around the rear axle and put an old sweatshirt against the "SMP" plastic bumper to avoid scratching it.

i used to run a rollback for the bodyshop that i worked for and even with that they are a pain in the neck to load - the bumpers usually hit either the ground or the bed when winching them up.


NOTE: All you guys using a tow "CHAIN" ...i'll make a suggestion that goes along with "putting a old heavy coat on the chain to help it from flying"

get another chain and drape it back and forth over your tow chain towards the middle...this works better with a shorter length of tow chain. - the weight of "safety chain" will - help but not eliminate the possibility of the chain "flying"...it may slow it down or help it to "drop" quicker.

i picked up that tip from working on the frame machine in the Body Shop...