The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

modifiedGMC · 08-09-2005, 09:34 PM

I used a disc rear out of a 1979 cadillac fleetwood. It has the same bolt pattern as the 79 five lug front end I used but I did have to weld some mounts on it for thetrailing arms. As for brake lines I used the ones on the caddy rearend even the flex hose to the frame it hooked right up. I used the prop valve off the caddy since it was four wheel disc. I used the original manual master on the truck but it's about to be changed to power with a different master.

08-09-2005, 09:34 PM	#13
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	I used a disc rear out of a 1979 cadillac fleetwood. It has the same bolt pattern as the 79 five lug front end I used but I did have to weld some mounts on it for thetrailing arms. As for brake lines I used the ones on the caddy rearend even the flex hose to the frame it hooked right up. I used the prop valve off the caddy since it was four wheel disc. I used the original manual master on the truck but it's about to be changed to power with a different master. __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!