The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phantom dually · 08-21-2005, 08:53 PM

Gettin down to the good stuff!! I have had a good weekend getting things done. Got the rearend under the truck and put the ladder bars in. I have tightened it all down yet. I have to do a little adjusting to get things 100%. Put the front sway bar in with all new poly bushings. Got the cam bolts on the upper arms set into position and tightened. Finally set some wheels on the front end and got it off the jack stands. Progress!!!!!!

08-21-2005, 08:53 PM	#97
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Gettin down to the good stuff!! I have had a good weekend getting things done. Got the rearend under the truck and put the ladder bars in. I have tightened it all down yet. I have to do a little adjusting to get things 100%. Put the front sway bar in with all new poly bushings. Got the cam bolts on the upper arms set into position and tightened. Finally set some wheels on the front end and got it off the jack stands. Progress!!!!!! Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 08-21-2005 at 08:54 PM.