The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 08-23-2002, 11:00 AM

Have you tried heating the bolt? They are using a Loctite thread
locker in the threads so you need heat to break it down. I really doubt if you can drill the bolt. They are pretty hard!

Jim

08-23-2002, 11:00 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Have you tried heating the bolt? They are using a Loctite thread locker in the threads so you need heat to break it down. I really doubt if you can drill the bolt. They are pretty hard! Jim