The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

my new 72 · 08-23-2002, 02:04 PM

I think I may have found the problem, but what do you guys think? I took the line between the master, and the P valve and plugged the master line with a clear hose with a tapered fitting on the end of it to make a seal. I then pumped the brakes as I watched the clear line. When I pressed the peddle down I could see bubbles coming out of the master, but when I hooked up the bleeber vaccum I didn't get bubbles. Has my master cylinder gone bad or what.

08-23-2002, 02:04 PM	#8
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	I think I may have found the problem, but what do you guys think? I took the line between the master, and the P valve and plugged the master line with a clear hose with a tapered fitting on the end of it to make a seal. I then pumped the brakes as I watched the clear line. When I pressed the peddle down I could see bubbles coming out of the master, but when I hooked up the bleeber vaccum I didn't get bubbles. Has my master cylinder gone bad or what. __________________ I'm going to Law School, wanna debate? It's good practice.