[cdowns]

if your getting power at liscence light try a ground from the housing to the frame

check for power at the rear wheel plug for the signals //key on left signal on on you should have 12v at an intermittant (flashing rate) at the yellow wire no juice there??check for juice at the firewall plug same thing with the green for the right// if its hot at the firewallplug and not the rear wheel plug you've got more splicing to do //a cheap way is a place that sells trailers sells the 4wire bonded ribbon loom by the foot at cheap rates

headlights check for power at the bulb//have power??bad bulb or ground===no power go to dimmer the middle top blue wire the largest of the 3should be hot all the time when headlight switch is on sometimes just disconnecting and cleaning terminals will work// power at the dimmerswitch you can just run a short jumper wire from the blue to one of the other wires to check bulbs