The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**dennislbrooks** · 10-06-2005, 07:53 AM

The adapter plate is 5/32" -- 1/4" plate will work fine. Matt, on the 79 booster --drop the rod down on the brake arm as much as it will comfortably go - 1 to 2 inches. You will need to drill a 3/8 hole. This will give more travel and put the braking action closer to the top.

10-06-2005, 07:53 AM	#4
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	The adapter plate is 5/32" -- 1/4" plate will work fine. Matt, on the 79 booster --drop the rod down on the brake arm as much as it will comfortably go - 1 to 2 inches. You will need to drill a 3/8 hole. This will give more travel and put the braking action closer to the top. Last edited by dennislbrooks; 10-06-2005 at 09:04 AM. Reason: correction