The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

tom hand · 09-01-2002, 12:19 PM

There is a screw or rubber plug about halfway up the cylinder. Remove it and fill it up the same way you do a rearend, till the oil is level with the hole. The best way I have found to put oil in one is to take a piece of paper and roll it up to make a funnel because the hole is so small it is hard to pour oil in it. Good Luck.

09-01-2002, 12:19 PM	#3
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	There is a screw or rubber plug about halfway up the cylinder. Remove it and fill it up the same way you do a rearend, till the oil is level with the hole. The best way I have found to put oil in one is to take a piece of paper and roll it up to make a funnel because the hole is so small it is hard to pour oil in it. Good Luck. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS