The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 11-28-2005, 11:52 PM

Pat yes it could! You just need to be carefull that the load on the third channel of the amp doesn't get too low. You would need 8 ohm subs if you use 2 subs and 4 ohm if you run a single sub!(if you run dual voice coil subs this would change!) Most 4 channel amps will only run 2ohms stereo or 4 ohms mono!

Kevin

11-28-2005, 11:52 PM	#21
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Car Audio Speaker Wiring Pat yes it could! You just need to be carefull that the load on the third channel of the amp doesn't get too low. You would need 8 ohm subs if you use 2 subs and 4 ohm if you run a single sub!(if you run dual voice coil subs this would change!) Most 4 channel amps will only run 2ohms stereo or 4 ohms mono! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!