The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67-72williso · 01-21-2006, 08:24 PM

For the front just use the Dana 44 and the gears you already have. All you need to change there is the hubs, rotors & lockouts. The rear you need to get an 8 lug full float to match your front gears. Hope this helps.
Later Willis

01-21-2006, 08:24 PM	#2
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: looking for 3/4 ton diffs for swap For the front just use the Dana 44 and the gears you already have. All you need to change there is the hubs, rotors & lockouts. The rear you need to get an 8 lug full float to match your front gears. Hope this helps. Later Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!