Quote:
|
Originally Posted by XXL
3/16" wall or 1/4" The latter sounds a bit overkill, but I thought I'd ping you first.
Also, do you think the cross tubes will work at 1.5"? Only other thing I am contemplating is to 2x4 box the tail end of the channel runs instead of that round tube. The rest would be round tube.
|
I'd go with 3/16" wall box. 1.5" .156 wall would be the size tubing I would use on the cross tubes. I would just box the end of the frame with another 2x4 going across. Gives it a clean look and it's stronger. You might want to maybe cross some of those tubes to provide some side to side support for the frame rails. Your going to be cutting one of the factory x members that provides this.
Later
Jr