The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 02-20-2006, 09:40 PM

Well it is almost a swinger!! I jot the rocker built an dscrewed in place untill the door is complete and working. I then cut down a drivers side truck door as my donor for the fourth door. I cut out the un-needed section and slid them together and just tacked the inside and cleco'd the outer skin. I modified the lower hinge mount on the door to recieve the lower hinge. I still need to section the upper hinge mount and lower it a few inches. That will be another day!! Back to work tomarow so progress will slow a bit on the truck since I only get 1 or 2 hours in the evening to work on it during the week.

Kevin

02-20-2006, 09:40 PM	#66
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! Well it is almost a swinger!! I jot the rocker built an dscrewed in place untill the door is complete and working. I then cut down a drivers side truck door as my donor for the fourth door. I cut out the un-needed section and slid them together and just tacked the inside and cleco'd the outer skin. I modified the lower hinge mount on the door to recieve the lower hinge. I still need to section the upper hinge mount and lower it a few inches. That will be another day!! Back to work tomarow so progress will slow a bit on the truck since I only get 1 or 2 hours in the evening to work on it during the week. Kevin Attached Images Last edited by Rokcrln; 10-11-2007 at 11:15 PM.