The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

red71cheyenne · 02-22-2006, 01:59 PM

I would make sure its "square". The assembly manual shows how wide the at the back the opening is, and I just measured that, the front opening, and used a level to make sure they were straight up and down. Someone else might be able to add a little more. But ya, as long as all the bolts go in and all the lines line up, I guess its all good.

02-22-2006, 01:59 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Blazer bedside installation I would make sure its "square". The assembly manual shows how wide the at the back the opening is, and I just measured that, the front opening, and used a level to make sure they were straight up and down. Someone else might be able to add a little more. But ya, as long as all the bolts go in and all the lines line up, I guess its all good. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty