Quote:
|
Originally Posted by Kontrol Phreaks
Here are some images of a 69 C10 that I built for a customer when I had my old shop. This truck is laid out on 22" wheels and uses KP Components brackets all the way around. Here is how our rear 60-72 Step Notch kit looks installed. You can see how the notch is designed to match the contour of the factory frame rails. It also has our Under the Bed floor kit installed off the front of the axle tube to locate the airbags. I went ahead and relocated the shocks off the back of the rearend, and had to shorten the pan hard bar as well.
If you have any questions about the truck, or parts used, please feel free to post them here. Or you can PM me and I will get the information over to you.
Clint Petree
KP Components
866-KP-LINKS
 |
can anyone tell me if those are the stock trailing arms in this pic? Looks like they kept the trailing arms, and just added a notch with bags, and relocated the shocks, and also put in the panhard bar? is that right. I want a setup like that and need to find out what to order ASAP