Quote:
Originally Posted by SmittySmith
Is there any way you could put an offset bushing on the top of the emergency brake pedal to give it some offset, maybe 1/2 inch or what it needs to clear. That way you could keep the stock pedal, or you might could mod the pedal arm with a z-bend to give you the clearance... just some thoughts.
~Smitty
|
Smitty,
I was planing on spacing the pedal over with a couple washers or something. I had thought about re-drilling the holes in the firewall and moving it over, but with the fuse box there, there isn't really enough room. The plan right now is to take the flat metal part of the pedal off and re-weld it towards the left side of the metal. That way, it effectively sticks over to the right.