Re: Brighter Instrument Bezel Lights - But not with LED's
Quote:
Originally Posted by TugOwar
Green Monster, I'm sure you know this but I'll mention it anyway. Thats a manual temp gauge. If that "wire" gets bent or kinked the gauge won't work right, if at all. Ask me how I know. And I wouldn't want mine touching the back of the header either, may give false reading.
When you take your cluster apart you're going to find that some cutting was done to get that after market gauge in there. To go back with a factory gauge and have it look right that part will have to be replaced.
I'll see if I can find a pic of it for you.
|
I agree. You will need the backing plate that holds the 2 gauges. Check with byrd on that part. He is the gauge guru and should have that part for you.
__________________
Jim
1970 C/10 Fleetside w/Ghost Flames
Lowered 4.5" front and 4" rear (Raked)
355/350 Turbo w/shift kit
10" Redneck Performance Verter w/2500 stall
Hooker Super Comps part#2808-1
Performer RPM Air-Gap
12 Bolt w/3:73 gears- Eaton Posi
Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads
|