The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

backinblack · 10-10-2002, 02:41 PM

I have searched the archives, and am STILL looking for a good place to buy a flip kit and c-notch kit for the rear, and drop spindles; all for a 71 GMC C-10. Please advise!! Also, I want to replace the ball joints, tie rod ends, etc., and wondered if it is better to try and find an entire front end kit, or just buy individually from the local auto parts store.

Thanks in advance!

Oh, I know the rear stuff can be fabricated, but I would rather just spend the money and buy pre-fabbed, as my time is rather limited.

10-10-2002, 02:41 PM	#1
backinblack Registered User Join Date: Aug 2002 Location: Utah Posts: 142	where can I buy a flip kit? I have searched the archives, and am STILL looking for a good place to buy a flip kit and c-notch kit for the rear, and drop spindles; all for a 71 GMC C-10. Please advise!! Also, I want to replace the ball joints, tie rod ends, etc., and wondered if it is better to try and find an entire front end kit, or just buy individually from the local auto parts store. Thanks in advance! Oh, I know the rear stuff can be fabricated, but I would rather just spend the money and buy pre-fabbed, as my time is rather limited. __________________ 69 chevy SWB 70 GTO 65 GTO hardtop 65 GTO ragtop 77 Trans Am Hmmm. Too many pontiacs, not enough chevy trucks yet.