|
Re: Non-a/c to a/c conversion?
Cut three vent holes in dash (some say replace dash, your choice)
Firewall is different (I cut out an a/c fire wall and welded it into mine)
You need these from A/C truck:
Grab inside fresh air vent with vacumn pod
Grab flapper vent under cowl and plastic bushing/nut
grab A/C control and mounting bracket from dash
compressor and brackets
A/C cone both inside cab and engine compartment including all vacumn lines, cables, and all needed firewall gromments.
Grab battery tray as it has bolt hole for A/C line bracket.
Grab A/C condensor in front of core support.
You can grab A/C core support or just drill the holes in yours.
BUT FIRST, TAKE LOTS OF PICTURES before you start taking A/C stuff off!!!
I am sure I have missed some small stuff, but if you take your time removing the A/C, you will see what you need....
|