The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

phantom dually · 09-05-2006, 09:12 PM

Nitto 420's I take it?? Looked ar my friends truck today and he said that the front does rub very very little. And his RUBS are only on very sharp full radius turns that only happen when he hits a dip at the same time. He is not rubbing on the upper fender though. He is rubbing on the inner plastic fender toward the front of the truck. He also has the Nitto 420 tire. I am going to try and get a wheel off and measure backspacing in inches. Also did you do the 2" shackle in the rear?? How about rolling the inner fender a bit?

09-05-2006, 09:12 PM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: Picked up a used CREW CAB Nitto 420's I take it?? Looked ar my friends truck today and he said that the front does rub very very little. And his RUBS are only on very sharp full radius turns that only happen when he hits a dip at the same time. He is not rubbing on the upper fender though. He is rubbing on the inner plastic fender toward the front of the truck. He also has the Nitto 420 tire. I am going to try and get a wheel off and measure backspacing in inches. Also did you do the 2" shackle in the rear?? How about rolling the inner fender a bit? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 09-05-2006 at 09:13 PM.