The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

chipflyer · 09-06-2006, 10:26 PM

What your looking for is on this site. http://www.turnswitch.com/speakers.htm

I ordered the 4x10 delco special from this site. It uses the original bracket and is the correct 8 ohm speaker for our trucks original radios. I put one in my truck and the sound is excellant and it has more room than the original. These are great guys to deal with and I highly recommend them.

Just an FYI but acording to my radio tech you must use an 8 ohm speaker if you are using the original radio or you will damage the radio.

Jeff

09-06-2006, 10:26 PM	#7
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Dash Radio Speakers What your looking for is on this site. http://www.turnswitch.com/speakers.htm I ordered the 4x10 delco special from this site. It uses the original bracket and is the correct 8 ohm speaker for our trucks original radios. I put one in my truck and the sound is excellant and it has more room than the original. These are great guys to deal with and I highly recommend them. Just an FYI but acording to my radio tech you must use an 8 ohm speaker if you are using the original radio or you will damage the radio. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.