More prgress, got the rear end under the frame and mocked up the rear suspention, got the front x-member bolted in and the front suspention ( 2" drop spindles and 1" drop springs) all bolted up. Started to mock up the brakes lines, but the stainless prebent ones I got from the truck shop don't seem to be right? Looks as if they will need to be corrected in a few spots, and I have all stainless retainers for the lines. Got the fuel line sorta in place to what I will need to add to it to reach the fuel cell( on order should be here in a week or two) from the Fuelcell guy
Anyway tomorrow try to get the rear suspention all buttoned up try to get a little further on the brake lines. I seem to be missing a bracket on the rear end where the flexible line connects to where the two brake lines split to get to each wheel. If anybod has one laying around I would like to get it from, PM if you have one. Couple of pics.