The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Ed ke6bnl · 04-29-2002, 06:12 AM

We thought we would do it the dright way and the lock smith pulled out a set for the 70 chevy 250 keys after about 45 min not one key worked. The next step is to clean out the lock and do it again. I told his to forget it I would drill it out. We drilled it out a little at a time with about a 3/8 drill when the key part turned with a screw driver we followed the proceedure with the paperclip an remove and changed it all out. Good luck Ed ke6bnl

------------------
Ed ke6bnl
Agua Dulce
70 S.E. Los Angeles
70 Chevy short bed
Sorry 50 F1 pu
Sorry 63 Ford Econoline pu

04-29-2002, 06:12 AM	#11
Ed ke6bnl Registered User Join Date: Mar 2002 Location: Agua Dulce, Ca. usa Posts: 179	We thought we would do it the dright way and the lock smith pulled out a set for the 70 chevy 250 keys after about 45 min not one key worked. The next step is to clean out the lock and do it again. I told his to forget it I would drill it out. We drilled it out a little at a time with about a 3/8 drill when the key part turned with a screw driver we followed the proceedure with the paperclip an remove and changed it all out. Good luck Ed ke6bnl ------------------ Ed ke6bnl Agua Dulce 70 S.E. Los Angeles 70 Chevy short bed Sorry 50 F1 pu Sorry 63 Ford Econoline pu __________________ Ed ke6bnl Agua Dulce 70 S.E. Los Angeles 70 Chevy short bed 1948 F3 ford pu 1949 F1 stock V8 flathead 3 on floor 1950 F1 pu street rod 1948 F6 Ford Dually/350sbc no bed stock trans&rear 1972 El Camino 4" chop 1953 Chevy 3100 2b daily driver 1970 SB 4X4 400ci 6in lift