[Roland]

Thanks for the responses. I am still "going the wrong way" on this project right now. It is in a tear down mode. It was a LWB and I have taken 12" out of the frame from under the cab and cut 8" off the end of the frame at the rear. I have it all aligned and welded and bolted and I am in process of sandblasting everything now. The frame is a '69, but I'm going back up with it as a '68. I am also still working on the '71 Monte in the background and I'm beginning a rebuild on a 700R4 for the truck. That should keep me busy for a while!