The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

see ten · 12-12-2006, 04:42 PM

I have heard of others having problems with those spindles from time to time. Even with the ECE spindles you may see rubbing on that 15" wheel when you cut it deep enough. Depending on your offset it may rub and it may not. The lower control arm can be clearanced and boxed if you prefer to keep the 15" wheel instead of upsizing.

12-12-2006, 04:42 PM	#3
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,073	Re: Defective drop spindles I have heard of others having problems with those spindles from time to time. Even with the ECE spindles you may see rubbing on that 15" wheel when you cut it deep enough. Depending on your offset it may rub and it may not. The lower control arm can be clearanced and boxed if you prefer to keep the 15" wheel instead of upsizing.