The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

longhorn71 · 02-03-2007, 03:14 AM

the firewall was left red and will be sprayed with under coating during the 6.0l ls1 swap.Cut the fire wall to convert it to a/c.the door striker area was all cracked and broke out so we cut and welded a chunk in from the parts truck.All the trim hole and emblem hole were shaved.the quarter on the drivers side was full of window mesh (GOTTA LIKE P/O

)and fiberglass.It was cut out and replaced with steal.The rear floor needs to be cut out and fixed yet.hoping to be in paint for the 20th.then start the ls-1 swap in march

the floor in the rear is so weak the rachet strap is holding the bed sides in to keep the tailgate shut!

02-03-2007, 03:14 AM	#2
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: blazer is back under way the firewall was left red and will be sprayed with under coating during the 6.0l ls1 swap.Cut the fire wall to convert it to a/c.the door striker area was all cracked and broke out so we cut and welded a chunk in from the parts truck.All the trim hole and emblem hole were shaved.the quarter on the drivers side was full of window mesh (GOTTA LIKE P/O )and fiberglass.It was cut out and replaced with steal.The rear floor needs to be cut out and fixed yet.hoping to be in paint for the 20th.then start the ls-1 swap in march the floor in the rear is so weak the rachet strap is holding the bed sides in to keep the tailgate shut! Last edited by longhorn71; 10-06-2007 at 12:36 AM.