The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*rage'nrat638* · 03-11-2007, 12:44 AM

#9 OK NOW WE HAVE THE T-STAT HOUSING OFF...
KEEP THE LITTLE CLIP THAT HOLDS THE LINKAGE TO THE CHOKE FLAP ROD IN YOUR PARTS TRAY

NEXT LETS REMOVE THE FRONT PUMP SQUIRTER... notice the little pointed check valve. i can't tell you how many carbs i taken apart that this baby is missing.
it was also missing the bottom gasket.. not good

you can see where it fit's in the air horn there.

03-11-2007, 12:44 AM	#9
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Holley 600 Rebuild / Overhaul #9 OK NOW WE HAVE THE T-STAT HOUSING OFF... KEEP THE LITTLE CLIP THAT HOLDS THE LINKAGE TO THE CHOKE FLAP ROD IN YOUR PARTS TRAY NEXT LETS REMOVE THE FRONT PUMP SQUIRTER... notice the little pointed check valve. i can't tell you how many carbs i taken apart that this baby is missing. it was also missing the bottom gasket.. not good you can see where it fit's in the air horn there. Attached Images Last edited by rage'nrat638; 07-25-2007 at 10:34 PM.