The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ChadMorris · 03-23-2007, 09:19 AM

OK, I hang out in the 60-66 forum most of the time, but surf all of them for info, so hopefully someone here can help.......

I have a 700R4 tranny, and the mounting bolt holes on my new aftermarket crossmember do not line up.

This tranny came out of an 1985 corvette...

Question: Do they have different tailpieces for the tranny's?
Can I just swap it out if they do?

I would hope that's all I have to do seeing how common they are...

Any info will be great

Thanks for the help...

Chad

03-23-2007, 09:19 AM	#1
ChadMorris Newbie truck Rebuilder! Join Date: Dec 2004 Location: Huntsville, Al Posts: 160	700R4 mount question OK, I hang out in the 60-66 forum most of the time, but surf all of them for info, so hopefully someone here can help....... I have a 700R4 tranny, and the mounting bolt holes on my new aftermarket crossmember do not line up. This tranny came out of an 1985 corvette... Question: Do they have different tailpieces for the tranny's? Can I just swap it out if they do? I would hope that's all I have to do seeing how common they are... Any info will be great Thanks for the help... Chad __________________ "Old Blue" 1964 GMC Fleetside in pieces 350 TPI with 700R4 tranny now installed( well kinda propped in place until the tranny crossmember is bolted in !!!!! 1995 Toyota 4runner , 197,000 miles and going... 2007 Honda Odyssey Van (Wifes car)