The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

AR15DEFENSE · 04-22-2007, 11:03 PM

check the teeth on the governor gear. on the left hand side of the trans will be a cap. pop the cap off and pull out the governor. check the plastic teeth on the end for wear. same thing happened to me 200 mi. after my last rebuild. the tranny shops usually reuse them from what I here. use a pan as you will lose a little fluid.

04-22-2007, 11:03 PM	#5
AR15DEFENSE Resident Absorber Join Date: Mar 2007 Location: WI Posts: 131	Re: 700r4 not shifting check the teeth on the governor gear. on the left hand side of the trans will be a cap. pop the cap off and pull out the governor. check the plastic teeth on the end for wear. same thing happened to me 200 mi. after my last rebuild. the tranny shops usually reuse them from what I here. use a pan as you will lose a little fluid. Attached Images __________________ The best offense is a better DEFENSE!