Thanks VT and LUV2.
Ok back to reality...
You may have noticed that the rear bumper was sitting low. This was because I had to shim the rear body mounts a bit (1/2") to get it back on the road. I knew the body mounts I positioned on top of the frame were gonna have to be shaved. So I didn't want to weld up the body until I knew it was sitting naturally.
I ended up cutting those body mount bushings in half. Here you can see the difference:
Full Bushing:
1/2 Bushing:
Body-High/Bumper-Low:
Body Sitting correctly on frame:
Now I'm working on bridging the 2nd row seat floor brace over the frame rails and sheeting it all in.
Here's how it all looks from the inside: