I did bench bleed the master, gravity bleed and can bleed all four corners and had a good pedal. I then fired it up and hit the brakes and the light came on. I checked the pop out button and it was not poped so I had my wife pump and hold the pedal while I cracked the bleeder on top of the pictured Prop. valve. It bleed out like a normal bleeder does but then that was it for any fluid out of any corner. The pedal will not pump back up or anything
Does it look to be the correct Prop valve for a disk/ drum set up or is this the drum/drum Prop valve? It was on the truck when I got it and so were the front disk so I have no info on what they were off of or what parts were left un touched.
Kevin
LFD Inc.