Quote:
Originally Posted by mylow53
also more picts and marc look at the last pict this is the piece im missing for both doors
gt
|
Greg-
Thanks for the pics. I am screwed. The problem is the small tab with the two small bolds as seen in pic (2) of your second post. That tab swivels as you raise or lower the cowl vent. This tab was missing on my current cab so I took it off my old cab not knowing that this piece needed to pivot I welded the two tabs together.
Obviously when I go to raise the cowl it binds. I guess I have (2) options.
1.) Cut the welds loose and drill out and place a small nut and bolt so that it can pivot again.
2.) weld the cowl shut.
Thanks for the photos and I will look for the window channel tomorrow.
Marc