Quote:
Originally Posted by bad6772
hey josh , cant wait to see the progress ,i love this build.can you give any tips on shaving the drip rails?
|
I only have a few tips. 1 is to only cut off about 4-5" at a time then tack it up. 2 is turn down you welder so it isn't very hot. The metal is kind of thin and since you are tacking the edges of the metal it burns back really easy. 3 is after you tack it all up and start grinding is smoth be carefully not to grind to much. Especially on the edges of the door. Good luck and it was pretty easy so you should be fine.
Josh