Re: Keep Your Cool! Vintage Air Sure Fit Install in a 67 C-10
Next up it to mock up the A/C under-dash unit. This is so you can drill the hole for the rear mount bracket.
There are a couple mounting points in the cab. The one on the far left uses an existing heater unit hole near the center of the firewall.
The first thing to do is install the bracket provided with the kit to the back of the A/C unit using a 10/32x1" bolt. Keep it straight up and down and snug the bolt down.
Next is to set the A/C unit in place in the cab. The tab on the blow motor sits INSIDE the dash as shown. It uses a 1/4-20x1" bolt with a washer, lock washer, and 1/4" nut.
|