[Rokcrln]

Had a few hours to kill today and thought I would get started on the cab roof chop. I first made a templet of the inside of the blazer tub were the cab back panel will weld in. Then I took that and transfered it to the back of the cab. Then I braced off the blazer windshield so it would not move once I cut the top off. I also added two locators to the blazer brace to help make sure the top lines up perfect. I then added a brace to teh truck cab window opening as well and started cutting after measuring several times. The back of the truck cab is cut off right at the floor line but I will section in the bottom of the cab later so all the panels will look complete and not cut off like they do now.

Kevin
LFD inc.