Re: Disc Brake Conversion
I would recommend a disc brake conversion from Mcgaupheys. I believe i am speeling that right. They offer a reasonably priced disc brake kit. If you plan on rebuilding the front end anyway. You can get a set of stock 72 spindles and rotors, bearings, calipers and pads. You can get that stuff from Advance. However you will need to purchase a new master clinder and prop valve from a retailer such as Classic Performance Products. It will run you around 129.00 for that stuff. If you go to the 72 stuff, you will have to change to 72 balljoints...
__________________
1947 International KB-1
1957 Chevy Bel-Air riding low
1962 swb fleetside
2002 Chevrolet Silverado 7-inch lift on 35 Daily driver
2016 Chevy Tahoe Better halves ride
|