Re: wiper motor wiring
FIRST, you are missing two plugs that go at the wiper MOTOR. There should be three. (See photo below)
Wiper switch plug:
Black wire = low speed
Dark blue (center) wire = wash
Light blue wire = high speed
The wiper switch wires are ground wires. If you remove the switch and simply jump them to ground, it will make each function work.
**NOTE - for high speed, you have to ground BOTH light blue & black at the same time.
Wiper motor plug:
Yellow wires are hot. One goes to fuse box and the other goes to the other terminal on the wiper motor. (see photo)
Dark blue wire connects directly to the dark blue wire on the switch plug.
(MISSING WIPER MOTOR PLUG):
Yellow wire - jumps around to the other yellow wiper motor plug. (see photo)
Light blue wire - connects directly to the light blue wire on the switch plug.
(MISSING WIPER MOTOR PLUG #2):
single black wire - connects directly to the black wire on the switch plug.
I hope that helps. If you need any more info, shoot me a PM.
__________________
There once was a member from Puckett.....Who ( fill in the blank blank blank ) bucket
Last edited by Putter; 10-01-2007 at 08:43 AM.
|