The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - PROJECT "Father/Son" C-20 Rolling Chassis Build

**ChiefRocka** · 01-05-2008, 07:03 PM

Back with a few more shots of the Disc Brake Conversion on Rich's 14Bolt...

The first thing was to remove those large heavy drum/hub assemblys, then the backing plates:
-
-

-

-
-
This is an INBOARD set-up:
-

-

Here are the Caliper mounts from Balistic Fab:
-

-
New Rotors:
-

-
-

-
Once the axles and hubs were removed...it was time to dust off the press...-
-

01-05-2008, 07:03 PM	#160
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build Back with a few more shots of the Disc Brake Conversion on Rich's 14Bolt... The first thing was to remove those large heavy drum/hub assemblys, then the backing plates: - - - - - - - This is an INBOARD set-up: - - Here are the Caliper mounts from Balistic Fab: - - New Rotors: - - - - Once the axles and hubs were removed...it was time to dust off the press...- - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"