The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Scott68-93-97 · 01-12-2008, 05:09 PM

Arent the top two bolts into the frame and just the lower bolt into the crossmember
You might be able to fab in newer style mounts to keep the motor lower as long as there is enough clearence

None the less I like it, it also makes the design look more like a modern truck frame

01-12-2008, 05:09 PM	#9
Scott68-93-97 Registered User Join Date: Jul 2006 Location: Fair Oaks, CA Posts: 475	Re: Cross Member Drop? Arent the top two bolts into the frame and just the lower bolt into the crossmember You might be able to fab in newer style mounts to keep the motor lower as long as there is enough clearence None the less I like it, it also makes the design look more like a modern truck frame __________________ 1968 Short Fleet 350/700r4 http://67-72chevytrucks.com/vboard/s...d.php?t=249435 1997 Bagged XtdCab Vortec350/4L60e http://67-72chevytrucks.com/vboard/s...44#post2286144 1993 XtdCab Longbed 4x4 6.5Turbo/NV4500 "Daily Driver" 1985 Toyota XtdCab 4x4 22re/W-56/Dual T-cases, Doug Thorley Header, Homebrew front and rear spring packs, Tons of Mods to suspension and drivetrain, 35" boggers, coming soon ARB's and 5.29's, Possible 4.3/700r4 swap Last edited by Scott68-93-97; 01-12-2008 at 05:12 PM.