[68 short step]

ok ive been doing some work...the rust inhibitor came in, and i applied 2 coats ( silver) of the rust bullet and one coat of the protective finish (black) per manufacture recomendation....also got the inner rocker panel welded in, lower kick panel, front and rear pillers...temperarely screwed the outer rocker on, hung the door and front fender to align the rocker as needed.......after lowering the front of the outer rocker bout 1/8" i had my 3/16 (well a paint stick) gap i wanted....i then noticed that the door has rust issues towards the lower front, causeing it to seperate and bow out (seen in pics)...all-in-all the rocker is flush with the bottom of door/fender/and cab corner....here are the pics..