The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pyro883 · 01-24-2008, 08:54 AM

Today I was able to get out and work on the truck a little big, now that I am on leave and thanks to FEDEX. I ordered some rust bullet to get started on a driver side front panel. Here are some before and during pics more to follow when I finish later on tonight. Basically i got this panel from the PO he threw in a bunch of spare parts. I took a wire brush and removed all of the loose rust and cleaned it up a bit and I am adding 2 coats of the rust bullet. After that tomorrow I will be adding some black primer and start on the other side with just taking it to bare metal and fill in the molding holes and priming it. Name: 0012.jpg
Views: 843
Size: 46.2 KB

01-24-2008, 08:54 AM	#10
pyro883 Registered User Join Date: Jan 2007 Location: Beaufort, SC Posts: 244	Re: Project Black Ops Today I was able to get out and work on the truck a little big, now that I am on leave and thanks to FEDEX. I ordered some rust bullet to get started on a driver side front panel. Here are some before and during pics more to follow when I finish later on tonight. Basically i got this panel from the PO he threw in a bunch of spare parts. I took a wire brush and removed all of the loose rust and cleaned it up a bit and I am adding 2 coats of the rust bullet. After that tomorrow I will be adding some black primer and start on the other side with just taking it to bare metal and fill in the molding holes and priming it.